|Pros:||Nice velcro pockets, easy to install|
|Cons:||Double sided tape (how long will it last?)|
Part Number 82-11-1-470-187
Arrived in four business days via UPS ground.
Underside of the roadster lid. The pneumatic lifts raise it to a vertical position…it’s begging for utility.
The backside of the Trunk Storage System is lined with industrial-grade double-sided adhesive. The plastic backing is molded perfectly to match the sheet metal.
I originally wanted to attach this with Velcro, but the third-brake light isn’t masked and will still be accessible. The only remaining concern was the Toll Free Roadside Assistance sticker would be lost.
Thoughtfully, they’ve included a Roadside Assistance sticker along with the Installation Instructions.
Those who have the Luggage Rack can rest easy. Four removable plastic caps give access to your mounting hardware.
Isopropyl alcohol prep pads are included.
Use them to wipe down the surface. Removing any grease and dirt maximizes adhesion.
To ensure proper adhesion, install the Storage System in ambient temperatures between 60°F and 110°F. During this installation, the temps were under 50°F. A heat gun was carefully used to warm the surface. A hairdryer would’ve done just as well.
Remove the transfer backing to expose the adhesive.
Before exposing the adhesive, dry-fit the Storage System over and over until you are absolutely sure the positioning is familiar. Use fingertips to gauge positioning in the recesses. An extra set of hands may help. Instructions suggest attaching one side and working across.
Once the Storage System is completely attached, apply additional pressure to contact points. To reduce strain to the hinge area, apply counterpressure from the backside of the trunk lid. Use a cotton towel to prevent any scratches. Congratulations! The Trunk Storage System is installed.
Yup, that’s the leather-bound owner’s manual relocated from the glove box.
The Velcro flap fits over perfectly. Now to figure out what to put in my newly re-acquired glove box.
Your dealer did supply you with a rear window cover (#82-11-1-469-778), right? Now there’s a home for it.
Nice ‘n clean.
Profile of the trunk lid shows the Storage System isn’t protrusive.
Storage System matches trunk’s interior as if it were straight from the factory. It’s an innovative use of space and looks great!
Note: The trunk organizer detailed in this article only works with 1996-1999 model year BMW Z3s. Starting in model year 2000 BMW redesigned the trunk lid making the trunk organizer incompatible.